REMOTE OPERATION CARRIER FREQUENCY COMMANDS
4-35
[SOURce]:FREQuency:MODE
Description: Sets the mode of operation of the carrier frequency.
Parameters: <CPD>
Valid values: CW | FIXed | SWEep | LIST
CW and FIXed are aliases; both are implemented here, as required by SCPI.
*RST sets: CW
[SOURce]:FREQuency:MODE?
Description: Queries the mode of operation of the carrier frequency.
Parameters: None
Response: <CRD>
Returned values: CW | FIX | SWE | LIST
[SOURce]:FREQuency:PHASe[:ADJust]
Description: Sets the carrier frequency phase.
Parameters: <NRf>
Valid values: -360° to 0° to +360°
*RST sets: 0°
[SOURce]:FREQuency:PHASe[:ADJust]?
Description: Queries the carrier frequency phase.
Parameters: None
Response: <NR2>
Returned values: Degrees
To Next Page
