Aeroflex 3412 - Page 286

REMOTE OPERATION FREQUENCY HOPPING COMMANDS
4-76
[SOURce][:MODulation]:FHOPping:FLISt:CLEar:ALL
Description: Clears the frequency hopping list.
Parameters: None
Valid values: None
[SOURce][:MODulation]:FHOPping:FLISt:CLEar[:TEND]
Description: Clears the hopping frequency list points from this address to the end of the list.
Parameters: <numeric_value>
Valid values: <NRf>
[SOURce][:MODulation]:FHOPping:FLISt:DELete
Description: Deletes the hopping frequency point at this address.
Parameters: <NRf>
Valid values: <addr>
[SOURce][:MODulation]:FHOPping:FLISt:INSert
Description: Inserts a hopping frequency point into the list at this address.
Parameters: <NRf>,<NRf>
Valid values: <addr>,<offset>
[SOURce][:MODulation]:FHOPping:FLISt[:VALue]
Description: Inserts a sequence of frequencies starting at the address given.
Parameters: <NRf>,<NRf>[,<NRf>...]
Valid values: <addr>,<offset>[,<offset>...]
[SOURce][:MODulation]:FHOPping:FLISt[:VALue]?
Description: Returns the addresses and values in the frequency hopping list.
Parameters: None
Response: <NR1>,<NR2>[,<NR1>,<NR2>...]
Returned values: Addresses and their associated offsets