Aeroflex 3412 - Page 287

REMOTE OPERATION FREQUENCY HOPPING COMMANDS
4-77
[SOURce][:MODulation]:FHOPping:INTernal:LINear:ADDRess
Description: Start address for linear hopping in the hop table.
Parameters: <NRf>
Valid values: <NRf> | MAXimum | MINimum
*RST sets: 0
[SOURce][:MODulation]:FHOPping:INTernal:LINear:ADDRess?
Description: Returns the start address for linear hopping in the hop table.
Parameters: None
Response: <addr>
Returned values: <NR1> | MAX | MIN
[SOURce][:MODulation]:FHOPping:INTernal:LINear:LENGth
Description: Length of the linear hopping sequence in the hop table.
Parameters: <NRf>
Valid values: <NRf> | MAXimum | MINimum
*RST sets: MAX
[SOURce][:MODulation]:FHOPping:INTernal:LINear:LENGth?
Description: Returns the length of the linear hopping sequence in the hop table.
Parameters: None
Response: <addr>
Returned values: <NR1> | MAX | MIN