REMOTE OPERATION FM COMMANDS
4-91
[SOURce][:MODulation]:FM[1]|2:SOURce
Description: Selects either an internal or external source to generate FM.
Parameters: <CPD>
Valid values: INTernal | EXTernal
*RST sets: INT
[SOURce][:MODulation]:FM[1]|2:SOURce?
Description: Queries whether the source for FM is internal or external.
Parameters: None
Response: <CRD>
Returned values: INT | EXT
[SOURce][:MODulation]:FM[1]|2:STATe
Description: Adds FM1 or FM2 to the set of active modulations, or removes FM1 or FM2 from it:
see Fig. 4-1 on page 4-19.
Parameters: <Boolean>
Valid values: OFF | ON | 0 | 1
*RST sets: OFF
[SOURce][:MODulation]:FM[1]|2:STATe?
Description: Queries whether the FM path is on (1) or off (0).
Parameters: None
Response: <Boolean>
Returned values: 0 | 1
To Next Page
