LOCAL OPERATION CONTROLS AND CONNECTORS
3-7
Introduction
Function keys
SIG
GEN
Displays the main signal generator menu.
SWEEP
Displays the sweep menu.
IQ
MOD
Displays the IQ modulation setup menu.
ANALOG
MOD
Displays the analog modulation setup menu.
RECALL
Recalls a previously stored instrument setting from memory.
SAVE
Saves the current instrument settings in memory.
UTIL
Displays the utilities menu.
Displays the total shift/increment menu.
Use this to:
inspect the total shift from the last keyed-in value
change the step size
transfer the current value as the keyed-in value
return the setting to the last keyed-in value.
Numeric keypad
For entering the value of a selected parameter.
Minus sign/backspace key: enters a minus sign or deletes the last
character input.
Terminator keys
Units keys
ENTER
Determine the units of the set parameters; also, the last of these four keys
(ENTER) is used to terminate a unitless entry, to confirm a selection, or to
enter µs units.
To Next Page
Loading...
