Aerotech A3200 - 1.2 Mechanical Specifications

Introduction HEXRCHardware Manual
1.2. Mechanical Specifications
The HEXRC must be installed in a rack mount console to comply with safety standards. Mount the
HEXRC so free airflow is available at the rear of the chassis. Allowance must also be made for the rear
panel connections and cables.
D A N G E R / H E A V Y : Refer to Table 1-5 for chassis mass specifications.
l The HEXRC exceeds 25 kg (55 lbs).
l Use both handles to carefully lift and carry the HEXRC.
www.aerotech.com Chapter 1 7