Aerotech A3200 - Chapter 2: Installation and Configuration; 2.1 Unpacking the Chassis

Installation and Configuration HEXRCHardware Manual
Chapter 2: Installation and Configuration
2.1. Unpacking the Chassis
Visually inspect the container of the HEXRC for any evidence of shipping damage. If any such damage
exists, notify the shipping carrier immediately.
Remove the packing list from the HEXRC container. Make sure that all the items specified on the packing
list are contained within the package.
D A N G E R / H E A V Y : Refer to Table 1-5 for chassis mass specifications.
l The HEXRC exceeds 25 kg (55 lbs).
l Use both handles to carefully lift and carry the HEXRC.
All of the documentation provided with the HEXRC should be saved for future reference. Additional
information about the HEXRC system is provided on the Serial and Power labels that are placed on the
HEXRC chassis.
The system serial number label contains important information such as the:
l Customer order number (please provide this number when requesting product support)
l Drawing number
l System part number
The AC power input label is located beside the AC power inlet and contains the factory configured AC power
requirements.
www.aerotech.com Chapter 2 11