© Agilent Technologies 1989–2002 Agilent 3070 / 79000 Site Preparation 4-4
Chapter 4: Site Preparation – Structural Requirements: Floor Requirements
Anti-Static Surface
Static electricity is destructive to your production
process and to your board test system. Careless
handling and poor planning can cost you yield and
system reliability. The boards you will be testing are
more easily damaged than the 3070 / 79000 board test
system, but good anti-static planning will ensure high
reliability from your system.
This is not an exhaustive description of anti-static
precautions, but as a reminder as you plan your system
area, here are some suggestions:
â– Anti-static flooring. Plan to use an anti-static
floor covering or mats.
â– Grounding straps. Plan for foot straps in
conjunction with anti-static flooring and wrist
3X79CT
POTS Bay off pallet
1-Channel 165 kg (365 lb)
4-Channel 170 kg (345 lb)
8-Channel 195 kg (430 kg)
307X Quick Verify 136 kg (300 lb)
Quick Verify on pallet 150 kg (330 lb)
Controllers 3070 - 300 Series Computer (in cabinet) 82 kg (180 lb)
3070 Series II - C110 Series Computer 15 kg (33 lb)
Controllers –
3070 Series 3 and 79000
B180L 14 kg (36 lb)
C240 20 kg (54 lb)
Visualize P-Class PC 11.3 kg (25 lb)
34595A or 44904A off
pallet
Instrument rack 182 kg (400 lb)
44990A off pallet EFS Board Handler 95 kg (200 lb)
Table 4-1 System weights (continued)
System Type Product Weight
To Next Page
Loading...
Need help?
General
