© Agilent Technologies 1989–2002 Agilent 3070 / 79000 Site Preparation 10-67
Chapter 10: Site Preparation – Power Requirements for Older Systems: Series 3 Power Requirements and Connections (Prior to May 2001)
E2195/E2197A xDSL/POTS Bay AC Outlets
The instruments in the xDSL/POTS bay, except the
Kikusui power supply, are plugged into the E1135C
PDU.
With the E2197A xDSL/POTS bay the 6811B ringer
supply is plugged into the E1135C PDU and the
isolation transformer is removed.
See
Communications Test for additional information.
To Next Page
Loading...
