Agilent Technologies 3070 Series User Manual

© Agilent Technologies 1989–2002 Agilent 3070 / 79000 Site Preparation 4-9
Chapter 4: Site Preparation – Structural Requirements: Moving Access Requirements
327X Series II / 3
Testhead (without
Support Bay)
Length 1150 mm (45 in)
Width 870 mm (34.2 in)
Height 900 mm (35 in)
327XPC Series 3
Testhead (without
Support Bay)
Length (88.4 mm (3.5 in) longer than 327X) 1238 mm (48.5 in)
Width 870 mm (34.2 in)
Height 900 mm (35 in)
327X Series II Support
Bay
Length 940 mm (37 in)
Width 600 mm (24 in)
Height 1320 mm (52 in)
327X Series II Quick
Verify
Length 744 mm (29.3 in)
Width 600 mm (24 in)
Height 720 mm (28.3 in)
307X and 317X Series 3
Testhead (without
Support Bay)
Length 1680 mm (66 in)
Width 790 mm (31 in)
Height 902 mm (35.5 in)
307XPC and 317X
Series 3 Testhead
(without Support Bay)
Length (88.4 mm (3.5 in) longer than 307X, 317X) 1765 mm (69.5 in)
Width 794 mm (31.3 in)
Height 907 mm (33.5 in)
Table 4-3 Dimensions of the uncrated system (continued)
System Type Dimension Measurement

Agilent Technologies 3070 Series Specifications

General

Brand	Agilent Technologies
Model	3070 Series
Category	Test Equipment
Language	English