175
Instrument Automation
Using clock time events
3. Scroll to select the parameter to be programmed.
For example, if the option “Load Method” is chosen for clock
time event #1, the display would look similar to the one
below.
4. Edit Time: and Method#: setpoints for this event.
This allows you to program a specific time at which your GC
will load a predetermined method.
5. When the clock event is executed, the following screen
appears:
Clock time for event to occur
Event type for entry #1
Setpoint parameter, varies
with event type
The instrument beeps when an
event is executed.
To Next Page
Loading...
