Agilent Technologies Infinity Binary Pump VL 1290 User Manual

Agilent 1290 Infinity Binary Pump User Manual 21
Site Requirements and Specifications
2
Specifications
Composition
precision
<0.15 % RSD, or 0.01 min SD,
whatever is greater.
0.2 —5.0 ml/min; based on
retention time at constant room
temperature
Composition
accuracy
±0.35 % absolute (5 – 95 %, 0.2 –
5.0 ml/min)
Water/caffeine tracer
Solvent selection
valve
Default Standard part of the pump
Integrated degassing
unit
Number of channels: 2
Internal volume per channel: 1.5 mL
Control Agilent ChemStation for LC (B.04.02
or above)
EZChrom Elite (3.3.2 SP1 or above)
OpenLAB (3.3.2 SP3)
Masshunter (B.02.01 SP1 or above)
Local control Agilent Instant Pilot (G4208A)
(B.02.08 or above)
Communications Controller-area network (CAN),
RS232C, APG remote: ready, start,
stop and shutdown signals, LAN
Safety and
maintenance
Extensive diagnostics, error detection
and display (through Agilent Lab
Advisor), leak detection, safe leak
handling, leak output signal for
shutdown of the pumping system.
Low voltage in major maintenance
areas.
GLP features Early maintenance feedback (EMF)
for continuos tracking of instrument
usage in terms of purge valve
switches and volume of pumped
mobile phase with pre-defined and
user settable limits and feedback
messages. Electronic records of
maintenance and errors.
Housing All materials recyclable.
Tab le 2 Performance specifications
Type Specification Comments

Agilent Technologies Infinity Binary Pump VL 1290 Specifications

General

Brand	Agilent Technologies
Model	Infinity Binary Pump VL 1290
Category	Laboratory Equipment
Language	English