Agilent Technologies Infinity Binary Pump VL 1290

94 Agilent 1290 Infinity Binary Pump User Manual
7 Error Information
Pump Error Messages
Pump drive encoder rollover
Error ID: 22424
Invalid pump drive encoder signals have been detected.
• Parameter: 1 – 4 referring to pump drive
Drive position limit
Error ID: 22425
Internal error.
• Parameter: 1 – 4 referring to pump drive
Insufficient power of drive encoder LED
Error ID: 22426
Insufficient power of drive encoder LED.
• Parameter: 1 – 4 referring to pump drive
Probable cause Suggested actions
1 Pump drive encoder is defect.
Please contact your Agilent service
representative.
Probable cause Suggested actions
1 Internal error.
Please contact your Agilent service
representative.
Probable cause Suggested actions
1 Pump drive encoder is defect.
Please contact your Agilent service
representative.