Agilent Technologies Infinity Binary Pump VL 1290 User Manual

Agilent 1290 Infinity Binary Pump User Manual 97
Error Information
7
Pump Error Messages
Unknown purge valve type
Error ID: 22435
The type information of the purge valve is invalid.
• Parameter: None
Pump drive encoder error
Error ID: 22437
The pump drive encoder has generated no signal.
• Parameter: 1 – 4 referring to pump drive
Pump drive error
Error ID: 22438, 22439
The pump drive failed during calibration.
• Parameter: 1 – 4 referring to pump drive
Probable cause Suggested actions
1 Wrong valve head installed.
Check or replace purge valve head.
2 Valve head has invalid RFID tag content.
Check or replace purge valve head.
Probable cause Suggested actions
1 Pump drive encoder is defect.
Please contact your Agilent service
representative.
Probable cause Suggested actions
1 Pump drive motor defect or mechanically
blocked.
Please contact your Agilent service
representative.

Agilent Technologies Infinity Binary Pump VL 1290 Specifications

General

Brand	Agilent Technologies
Model	Infinity Binary Pump VL 1290
Category	Laboratory Equipment
Language	English