Agilent Technologies Infinity Binary Pump VL 1290 User Manual

232 Agilent 1290 Infinity Binary Pump User Manual
13 LAN Configuration
Dynamic Host Configuration Protocol (DHCP)
Dynamic Host Configuration Protocol (DHCP)
General Information (DHCP)
The Dynamic Host Configuration Protocol (DHCP) is an auto configuration
protocol used on IP networks. The DHCP functionality is available on all
Agilent HPLC modules with on-board LAN Interface and “B”-firmware
(B.06.40 or above).
• G1314D/E/F VWD
• G1315C/D DAD
• G1365C/D MWD
• G4212A/B DAD
• G4220A/B Binary Pump
• G1369C LAN Interface Card
• 1120/1220 LC System
When the initialization mode “DHCP” is selected, the card tries to download
the parameters from a DHCP Server. The parameters obtained become the
active parameters immediately. They are not stored to the non-volatile
memory of the card.
Besides requesting the network parameters, the card also submits its
hostname to the DHCP Server. The hostname equals the MAC address of the
card, e.g. 0030d3177321. It is the DHCP server's responsibility to forward the
hostname/address information to the Domain Name Server. The card does not
offer any services for hostname resolution (e.g. NetBIOS).
Figure 41 DHCP (Principle)
9=8E
HZgkZg
6Xi^kZ
EVgVbZiZg

Agilent Technologies Infinity Binary Pump VL 1290 Specifications

General

Brand	Agilent Technologies
Model	Infinity Binary Pump VL 1290
Category	Laboratory Equipment
Language	English