8AL90608USAGed01 42 / 77
It is recommended to create a new login specific for Alcatel-Lucent 4059EE in order to not
lock the built-in
administration account.
1. Host – Enter
hostname or ip-
address of the
server.
2. User – Enter user
name for Alcatel-
Lucent OpenTouch
user that should be
used for
authentication.
3. Password – Enter
password for the configured user.
When integration to Alcatel-Lucent OpenTouch 1.x is used, notification url and notification
port needs to be configured.
4. Notification url – Enter url for the local machine. Alcatel-Lucent OpenTouch will send
BLF notifications to the configured url. Must be reachable from Alcatel-Lucent
OpenTouch.
5. Notification port – Enter port where Alcatel-Lucent 4059EE will listen for notifications
from Alcatel-Lucent OpenTouch.
6. Https – Tick box if https should be used.
12.3.3.3 Prefixes
Prefixes are used when a call is made from a UD result in order to decide whether the
number need to be formatted. Formatting is used to now if trunk-access code, area code
should be added to the number to make it complete for dialing. The settings are located at
System settings – PCXConnection – Prefixes.
1. Trunk seizure – Enter trunk seizure prefix used by Alcatel-Lucent OmniPCX
Enterprise
2. International code – Enter the international code prefix used in the country where the
operator is installed.
3. Country code - Enter the ITU-T
E.164 country code for the country
where the operator is installed.
4. Area code – Enter your area code (if
this is used in your country).
5. Internal number length – Enter the
length of the extension used by the
Alcatel-Lucent OmniPCX Enterprise.
If mixed number length are used,
enter the highest value.
To Next Page
Loading...
Need help?
General
