Allen-Bradley Kinetix 300 - Chapter 6 Status Indicators

Rockwell Automation Publication 2097-UM001D-EN-P - November 2012 127
Configure and Start Up the Kinetix 300 Drive Chapter 6
Status Indicators
The Kinetix 300 drive has five status indicators located around the periphery of
the front panel display as shown below. These status indicators used to monitor
the system status, activity, and troubleshoot faults.
Figure 74 - Front Panel Display
Figure 75 - Status Indicators
Status
Indicator
Function Description
A Enable Orange status indicator means that the drive is enabled (running).
B Regen Yellow status indicator means the drive is in Regeneration mode.
C Data entry Yellow status indicator flashes when changing.
D Drive fault Red status indicator illuminates upon a drive fault.
E Comm activity Green status indicator flashes to indicate communication activity.