Allen-Bradley Kinetix 300 User Manual

78 Rockwell Automation Publication 2097-UM001D-EN-P - November 2012
Chapter 4 Connecting the Kinetix 300 Drive System
Flying-lead Feedback Cable Pin-outs
Table 34 - 2090-XXNFMF-Sxx or 2090-CFBMxDF-CDAFxx Feedback Cable
Table 35 - 2090-CFBM6DF-CBAAxx Feedback Cable
Connector Pin
High-resolution Feedback
Incremental
Feedback
Drive MF
Connector Pin
9V Encoder 5V Encoder 5V Encoder
1 Sin+Sin+AM+1
2 Sin-Sin-AM-2
3 Cos+Cos+BM+3
4 Cos-Cos-BM-4
5Data+Data+IM+5
6 Data- Data- IM- 10
9 Reserved EPWR_5V EPWR_5V 14
10 Reserved ECOM ECOM 6
11 EPWR_9V Reserved Reserved 7
12 ECOM Reserved Reserved 6
13 TS+ TS+ TS+ 11
14 TS- TS- TS- –
15 Reserved Reserved S1 12
16 Reserved Reserved S2 13
17 Reserved Reserved S3 8
Connector Pin
High Resolution Incremental Feedback
Drive MF
Connector Pin
TLY-Axxxx-B
TLAR-Axxxxx
TLY-Axxxx-H
6 BAT+ Reserved BAT+
9
Reserved
AM+ 1
10 AM- 2
11 BM+ 3
12 BM- 4
13 DATA+ IM+ 5
14 DATA- IM- 10
15
Reserved
S1 12
17 S2 13
19 S3 8
22 EPWR 5V EPWR 5V 14
23 ECOM and BAT- ECOM 6
24 Shield Shield Connector housing

Allen-Bradley Kinetix 300 Specifications

General

Drive Type	Servo Drive
Series	Kinetix 300
Communication Protocol	EtherNet/IP
Communication	EtherNet/IP
Control Modes	Torque, Velocity, Position
Operating Temperature	0...50 °C (32...122 °F) without derating, 50...60 °C (122...140 °F) with derating
Protection Rating	IP20
Control Method	Position, Velocity, Torque
Motor Compatibility	Allen-Bradley Kinetix motors
Safety	Safe Torque-Off (STO)
Feedback	Incremental Encoder
Feedback Type	Incremental Encoder
Dimensions	Varies by model
Storage Temperature	-40°C to 85°C
Humidity	5 to 95% non-condensing
Vibration	5 to 500 Hz, 2 g
Shock	30 g for 11 ms
Input Voltage	230V AC, 400V AC
Power Supply Voltage	230V AC, 400V AC