Allen-Bradley Kinetix 300 - Wiring the Kinetix 300 Drive Connectors; Wire the Safe Torque-Off (STO) Connector; Wire the Back-Up Power (BP) Connector

Rockwell Automation Publication 2097-UM001D-EN-P - November 2012 69
Connecting the Kinetix 300 Drive System Chapter 4
Wiring the Kinetix 300 Drive
Connectors
This section provides examples and wiring tables to assist you in making
connections to the Kinetix 300 drive.
Wire the Safe Torque-off (STO) Connector
For the safe torque-off (STO) connector pinouts, feature descriptions, and wiring
information, see Chapter 8 on page 159.
Wire the Back-up Power (BP) Connector
Table 26 - Back-up Power (BP) Connector
+
24
-
+24V DC
RETURN
Kinetix 300 Drive, Front View
Drive Cat. No. Terminals
Recommended
Wire Size
mm
2
(AWG)
Strip Length
mm (in.)
Torque Value
N•m (lb•in)
2097-V3xPRx
+24V DC
1.5 (16) 6 (0.25) 0.5 (4.5)
-24V DC