Rockwell Automation Publication 2097-UM001D-EN-P - November 2012 63
Connecting the Kinetix 300 Drive System Chapter 4
Voiding of CE Compliance
The three-phase and neutral in-line filter applications described above may not be
adequate from an EMC aspect for CE compliance. Therefore, EMC validity and
CE marking by Rockwell Automation is voided when three-phase and neutral in
line filters are used.
ATTENTION: The three-phase isolation transformer and neutral in-line filter
applications described in this document have not been tested for EMC by
Rockwell Automation and products used in such installations are not considered
CE marked by Rockwell Automation.
If this three-phase isolation transformer and neutral in-line filter application is
used, the responsibility for EMC validation lies with the user and CE marking of the
system becomes the user's responsibility.
If CE compliance is a customer requirement, single-phase line filters that have been
tested by Rockwell Automation and specified for the product should be used. See
Kinetix Servo Drives Specifications Technical Data, publication GMC-TD003
for
catalog numbers.
To Next Page
Loading...
