Rockwell Automation Publication 2097-UM001D-EN-P - November 2012 197
Appendix C
Kinetix 300 Drive ID Tag Numbers
Tag Number Descriptions
To change these parameters by using an Explicit Message you configure the
message to target class 374. The instance corresponds to the ID tag number in
Table 7 8
. The attribute is defined by the Drive Object Attributes table on
page 190
.
Topic Page
Tag Number Descriptions 197
Index Base Addressing 210
Memory module writes are limited to 1,000,000 per device. Make sure that all
writes targeted at the memory module are necessary and not done as part of a
background or cyclic task.
To Next Page
Loading...
