Rockwell Automation Publication 2097-UM001D-EN-P - November 2012 19
Chapter 2
Installing the Kinetix 300 Drive System
Topic Page
System Design Guidelines 20
Electrical Noise Reduction 26
Mount Your Kinetix 300 Drive 34
ATTENTION: Plan the installation of your system so that you can perform all
cutting, drilling, tapping, and welding with the system removed from the
enclosure. Because the system is of the open type construction, be careful to
keep any metal debris from falling into it. Metal debris or other foreign matter
can become lodged in the circuitry, which can result in damage to components.
To Next Page
Loading...
Need help?
General
