Allen-Bradley PanelView Plus 7 User Manual

60 Rockwell Automation Publication 2711P-UM007D-EN-P - December 2015
Chapter 3 Configure Terminal Settings
Delete Files from Terminal
You can delete FactoryTalk View ME application .mer files or font files that
reside in nonvolatile memory of the terminal, a USB drive, or an SD card.
1. Press Terminal Settings, then choose File Management>Delete
Files>Delete Applications or Delete Fonts.
2. To select the storage location of the application or font file you want to
delete, press Source:
• Internal Storage – nonvolatile memory of the terminal.
• External Storage 1 – SD card that is loaded in card slot of terminal.
• External Storage 2 – USB drive that is loaded in USB host port of
terminal.
3. Select a file that appears in the list for the selected storage area.
4. Press Delete.
5. Select Yes or No when asked if you want to delete the selected
application or font file.
Delete Log Files
You can delete log files, alarm history files, and alarm status files from the
System Default location of the terminal. The application generates the files
during runtime.
1. Press Terminal Settings>File Management>Delete Files>Delete Log
Files.
You are asked to confirm the deletion of the files.
Do you want to delete the FactoryTalk View ME Station Log Files?
2. Select Yes or No.
Log files not in the System Default location are not deleted.

Allen-Bradley PanelView Plus 7 Specifications

General

Operating System	Windows CE 6.0
Memory	512 MB RAM
Mounting	Panel mount
Display Type	Color TFT LCD
Processor	ARM Cortex-A8
Storage	512 MB Flash
Communication Ports	Ethernet, USB, Serial
Input Voltage	24V DC
Operating Temperature	0°C to 50°C (32°F to 122°F)
Environmental Rating	NEMA 4X
Storage Temperature	-20°C to 60°C (-4°F to 140°F)
Relative Humidity	5% to 95% non-condensing
Certifications	CE, UL, cUL
Display Sizes	4.3", 7", 10", 15", 19"
Touchscreen	Resistive or Projected Capacitive (depending on model)