Rockwell Automation Publication 2711P-UM007D-EN-P - December 2015 75
Configure Terminal Settings Chapter 3
Regional Settings
You can change the display format for dates, times, and numerics to match the
standards of a country or region. Languages are installed with the operating
system. Before changing regional settings, you must select a language.
To select a language that is installed on the terminal, follow these steps.
1. Select Terminal Settings, then choose Time/Date/Regional
Settings>Language.
2. Select a language by pressing the up and down cursors.
3. Press OK.
The selected language shows under Current Language on the Regional
Settings dialog box.
Change the Decimal Separator
You can change the decimal separator that is used in numeric formats for the
selected language. The default separator is a period.
1. Select Terminal Settings, then choose Time/Date/Regional
Settings>Numeric Format.
The default separator is shown.
2. Enter a maximum of three characters for the new separator.
3. Press OK.
To Next Page
Loading...
