Allen-Bradley PowerFlex400

Supplemental Drive Information A-5
Control Outputs Relay: Quantity: (2) Programmable Form C
Specification
Resistive Rating:
Inductive Rating:
3.0A at 30V DC, 3.0A at 125V, 3.0A at 240V AC
0.5A at 30V DC, 0.5A at 125V, 0.5A at 240V AC
Optional
Relay Card:
Quantity: (6) Optional Programmable Form A (Drive Frames D, E
& F Only)
Specification
Resistive Rating:
Inductive Rating:
0.1A at 30V DC Class II circuits, 3.0A at 125V,
3.0A at 240V AC
0.1A at 30V DC Class II circuits, 3.0A at 125V
3.0A at 240V AC
Opto: Quantity:
(1) Programmable
Specification: 30V DC, 50mA Non-inductive
Analog: Quantity: (2) Non-Isolated, 0-10V or 4-20mA
Specification
Resolution:
0 to 10V DC Analog:
4-20mA Analog:
10-bit
1k ohm minimum
525 ohm maximum
Keypad Display: Integral 2 line by 16 character LCD with (5) LED Indicators
Languages: English, Français, Español, Italiano, Deutsch, Português, Nederlands
Communication Type: Serial (RS485)
Supported
Protocols
(Standard):
Drive Serial Interface (DSI)
Modbus RTU
Metasys N2
Supported
Protocols
(Optional):
DeviceNet
EtherNet/IP
PROFIBUS DP
ControlNet
LonWorks
P1 - Floor Level Network (FLN)
Software
(Optional):
Windows Based
Pocket PC/Windows Mobile 2003
Category Specification