Allen-Bradley PowerFlex400 User Manual

Appendix G
P1 – Floor Level Network (FLN)
Appendix G provides information about controlling a PowerFlex 400
drive, setting its Reference, and accessing its parameters through
configurable points when the P1-FLN protocol is selected. The P1-FLN
protocol is a serial communication protocol used by the Siemens
APOGEE
®
system.
The P1-FLN master performs read and write commands to certain
points, and the internal P1-FLN protocol firmware transfers/translates
the data between these points and the drive.
When a read or write command occurs to a certain point, data in the point
is refreshed from or transferred to the drive.
The P1-FLN master also performs cyclic polling of all the virtual objects.
P1-FLN Points
A P1-FLN node may contain up to 99 points.
Topic Page
Understanding P1-FLN
G-1
Network Points G-2
Using Percent (%) for the Reference G-6
Using P1 Configurable Points to Access Parameters G-7
Understanding P1-FLN

Allen-Bradley PowerFlex400 Specifications

General

Brand	Allen-Bradley
Model	PowerFlex400
Category	Controller
Language	English