Allen-Bradley PowerFlex400

Installation/Wiring 1-5
Figure 1.2 Frames D, E and F Mounting Clearances
Debris Protection
Frame C Drives – A plastic top panel is included with the drive. Install
the panel to prevent debris from falling through the vents of the drive
housing during installation. Remove the panel for IP 20/Open Type
applications.
Frame D, E and F Drives – These drives have built-in debris protection.
Installation of a protective panel is not required.
Storage
• Store within an ambient temperature range of -40° to +85°C.
• Store within a relative humidity range of 0% to 95%,
non-condensing.
• Do not expose to a corrosive atmosphere.
150 mm
(6.0 in.)
150 mm
(6.0 in.)
50 mm
(2.0 in.)
50 mm
(2.0 in.)
250 mm
(9.8 in.)
150 mm
(6.0 in.)
50 mm
(2.0 in.)
50 mm
(2.0 in.)
Frame D & E
Frame F