Allen-Bradley Series B

Table of Contents
iv
Chapter 5
Reader Address Esc - y <n> A 5-37
Reader Address Syntax 5-37
Good Read Beep Tone Esc - y <n> B 5-38
Good Read Beep Tone Syntax 5-38
Good Read Beep Tone Example 5-38
Speaker/LED Control Esc - y <n> C 5-39
Speaker/LED Control Syntax 5-39
Speaker/LED Control Example 5-39
Pulse Speaker Esc - y <n> T 5-40
Pulse Speaker Syntax 5-40
Pulse Speaker Example 5-40
Laser Scanning Options Esc - y <n> R 5-41
Laser Redundancy Check Esc - y 1 R 5-41
Laser Redundancy Check Syntax 5-41
Laser Redundancy Check Example 5-41
Laser Connection Detection 5-42
Laser Connection Detection Syntax 5-42
Laser Connection Detection Example 5-42
Continuous Read Mode Esc -y 4 R 5-43
Continuous Read Mode Syntax 5-43
Continuous Read Mode Example 5-43
Trigger Latch Mode Esc -y 8 R 5-44
Trigger Latch Mode Syntax 5-44
Trigger Latch Mode Example 5-44
Laser Shutoff Delay Esc -y <n> V 5-45
Laser Shutoff Delay Syntax 5-45
Laser Shutoff Delay Example 5-45
Chapter 6
Programmable Features 6-1
Configuration Bar Code Symbols 6-2
Syntax Errors 6-3
Syntax Error Example 6-4
Getting Started 6-4
Show Configuration 6-6
Enter Configuration Mode 6-6
Reset 6-6
Exit Configuration Mode 6-6
Default Configuration 6-6
Full ASCII Conversion 6-7
Code 39 6-7
Check Character Verification 6-7
Minimum and Maximum Lengths 6-7
Interleaved 2 of 5 6-8
Programming Via Escape
Sequences
Programming Via
Configuration Bar Code
Symbols