Index
I–8
Publication
1747-6.2
Q
Quick
Start for Experienced Users, 1-1
R
RAM, power back-up
SLC 5/01 or SLC 5/02 processors, 9-4
SLC 5/03 and higher processors, 9-5
RAM, processor specification, 2-9
RC network, 2-26
Related Documentation, P-3
relays, surge suppressors for
, 2-25
REM, keyswitch position for the SLC 5/03
and SLC 5/04 processors, 5-16
remote I/O capacity, processor
specification, 2-9
Remote I/O Passthru, D-2
Removable T
erminal Blocks (R
TB), 7-10
installing, 7-1
1
removing, 7-10
using, 7-10
removing power from the SLC 500 control
system, 10-2
Replacement Parts, 1
1-1
Replacing a fuse on the Power Supply, 9-8
required tools and equipment, 1-1
retainer clips, replacing on modules, 9-6
RS-232
connectors, B-8
DCE pinout, B-9
DF1 protocol, B-4
DTE pinout, B-8
overview
, B-1
SLC 500 devices that support, B-3
RS-232 application examples
DF1 full-duplex peer-to-peer
, B-20
half-duplex with slave-to-slave routing,
B-20
RS-232 connector pin assignments
1746-BAS
to a modem, B-13
to DTE, B-14
1747-KE
to a modem, B-12
to DTE, B-13
1770-KF3 to a modem, B-14
1771-KGM
to a modem, B-15
to DTE, B-16
1775-KA
to a modem, B-16
to DTE, B-17
2760-RB
to a modem, B-14
to DTE, B-15
5130-RM
to a modem, B-18
to DTE, B-19
IBM A
T to a modem, B-1
1
IBM A
T to an SLC 5/03 processor, B-1
1
PLC-5
to a modem, B-17
to DTE, B-18
SLC 5/03 processor
to a modem, B-1
1
to an IBM A
T (with cable 1747-CP3),
B-12
to DTE, B-12
RS-232 devices
1746-BAS module, B-3
1747-KE module, B-3
1770-KF3 module, B-3
1771-KGM, B-5
R
TB, 7-10
R
TS (Request to Send), B-7
RUN, keyswitch position for SLC 5/03 and
SLC 5/04 processors, 5-15
S
Safety Considerations, 3-1
1
Disconnecting Main Power
, 3-1
1
master control relay circuits, periodic
tests of, 3-12
Power Distribution, 3-1
1
Safety Circuits, 3-1
1
SCADA applications, B-1
SCADA applications guide, publication
number ICCG-1
1.6, B-1
scan time, processor specification, 2-9
selecting
chassis, 2-3
contact protection, 2-26
discrete I/O modules, 2-10
enclosures, 2-15
isolation transformers, 2-22
operator interfaces, 2-15
power supplies, 2-1
1
processors, 2-4
SLC 5/01 and SLC 5/02 memory
modules, 2-18
SLC 5/03 and higher memory modules,
2-20
speciality I/O modules, 2-10
surge suppressors, 2-24
shock (operating), processor specification,
2-9
AB PLCs
To Next Page
Loading...
