Allen-Bradley SMC-50 - Page 201

Rockwell Automation Publication 1560F-UM001A-EN-P - June 2019 201
Parameter Information Appendix A
33 Peak Current 5 Amps 0/15000 0 Displays the measured peak current of the 5th previous start. R
34 Motor Speed % 0/100 0 Displays the estimated motor speed during starting and
stopping. This parameter is only valid when using the linear
speed starting or linear speed stopping modes.
R
35 THD Va % 0/1000 0 Measures the THD of the applied Phase A line voltage. R
36 THD Vb % 0/1000 0 Measures the THD of the applied Phase B line voltage. R
37 THD Vc % 0/1000 0 Measures the THD of the applied Phase C line voltage. R
38 THD Vave % 0/1000 0 Displays the calculated average of the three voltage THD
measurements.
R
39 THD Ia % 0/1000 0 Measures the THD of the applied Phase A current. R
40 THD Ib % 0/1000 0 Measures the THD of the applied Phase B current. R
41 THD Ic % 0/1000 0 Measures the THD of the applied Phase C current. R
42 THD Iave % 0/1000 0 Displays the calculated average of the three current THD
measurements.
R
Table 66 - SMC -50 Parameter List (Continued)
Number Name Unit Min/Max Default Enum Text Description R/W