2–18 Chapter 2: Getting Started
Quartus II Compilation
Cyclone V Hard IP for PCI Express November 2011 Altera Corporation
6. Click Next to display the Add Files page.
7. Perform the following steps to add the Quartus II IP File (.qip) to the project:
a. Click the browse button next the File name box and browse to
pcie_de_gen1_x4_ast64/synthesis/ directory.
b. In the Files of type list, select IP Variation Files (*.qip).
c. Click pcie_de_gen1_x4_ast64.qip and then click Open.
d. On the Add Files page, click Add, then click OK.
1 Click Yes, if prompted, to create a new directory.
8. Click Next to display the Device page.
9. On the Family & Device Settings page, choose the following target device family
and options:
a. In the Family list, select Cyclone V.
b. In the Devices list, select Cyclone V GX PCIe.
c. In the Available devices list, select5CGXFC7D6F31C7.
10. Click Next to close this page and display the EDA Tool Settings page.
11. Click Next to display the Summary page.
12. Check the Summary page to ensure that you have entered all the information
correctly.
13. Click Finish to create the Quartus II project.
14. To compile your design using the Quartus II software, on the Processing menu,
click Start Compilation. The Quartus II software then performs all the steps
necessary to compile your design.
To Next Page
Loading...
