Ametek Sorensen XG - Selecting ENET as the Communication Port

Communications Options
M370430-01 Rev B 6-17
6
End of Message
The end of message is the Carriage Return character (ASCII 13,
0x0D).The power supply ignores the Line Feed (ASCII 10, 0x0A)
character.
Setting Up a HyperTerminal Connection
To set up a HyperTerminal connection:
1. Start Windows HyperTerminal by clicking Start >All
Program >Accessories > Communications > HyperTerminal.
See Figure 6-20.
Figure 6-20 HyperTerminal Connection