Ametek Sorensen XG User Manual

Error Messages
B-6 M370430-01 Rev B
Table B-3 Device-Specific Error List
Error
Code
Error Message Description
-365
Time out error
This is a generic device-dependent error.
Query Error List
An error number in the range [-499, -400] indicates that the output
queue control of the instrument has detected a problem with the
message exchange protocol described in IEEE 488.2, chapter 6. The
occurrence of any error in this class causes the query error bit (bit 2) in
the Event Status Register to be set.
Table B-4 Query Error List
Error
Code
Error Message Description
-400
This is the generic query error for the power supply, used only
when the other types of errors do not apply.

Ametek Sorensen XG Specifications

General

Output Type	DC
Cooling	Forced air
Control Interface	Analog
Ripple Voltage	10 mVrms / 50 mVpp typical
Operating Temperature	0°C to +50°C
Protections	OVP, OCP, OTP
Output Voltage Range	0-5V to 0-600V (depending on model)
Input Frequency	47-63 Hz