Communications Options
6-60 M370430-01 Rev B
protocol for the communication. The XG/XTR power source uses
ASCII characters and instrument SCPI commands for remote
control. The IANA registered Port number for the Instrument
SCPI interface is 5025.
TCP Remote port = 5025
The socket number can be changed on the power source using the
SYST:COMM:LAN:PORT command. Refer to the SYSTEM
COMMANDS section that follows.
Instrument Drivers and Application Software
Instrument drivers for National Instruments LabWindows/CVI and
LabView are generally available for download from the AMETEK
Programmable Power Web site at www.programmablepower.com.
Also available are ready-to-use interactive graphical user interface
(GUI) programs for download.
To Next Page
Loading...
