M370430-01 Rev B Index–1
Index
7 segment font, use of vi
9-position mode control knob
illustrated 3–2
positions described 3–3
AC input connector
defined 2–5
illustrated 1–6, 1-8
active power factor correction 1–2
ALARM LED
clearing 3–21
illuminated 3–21
latched 3–16
alarm output latching, defined 3–23
alarm, masked, defined 3–22
analog programming
defined 4–2
lines 4–3
approvals
EMC C–6
safety C–6
automatic mode crossover, described 3–13
calibration
exiting the mode 6–10
items 6–2
loading parameters 6–25
performing via SCPI commands 6–2
restoring factory calibration 6–26
saving parameters in a text file 6–25
storing parameters 6–25
command string
punctuation not sent A–5
command string punctuation
blank spaces A–4
colons A–4
commas A–4
semicolons A–4
constant current mode, described 3–13
constant voltage mode, described 3–13
current configuration memory settings 3–35
current share command 3–46
current sharing, defined 3–42
DC output connector
illustrated 4–7
short circuit protection of 1–2
DC output connectors, hole diameter 1–7, 1-8
display
behavior of 2–8
font 3–2
front panel 1–5
output current 1–2
output current, illustrated 1–5
output voltage 1–2
output voltage, illustrated 1–5
ENET, cable specifications 5–15
error messages, execution errors B–4
execution errors, list of B–4
foldback
disabling 3–24
resetting activated 3–25
setting delay time 3–24
setting protection 3–24
foldback mode, defined 3–24
Front panel display
7 segment font 3–9
illustrated 1–5
gain calibration, effect of 6–6
gain error, described 6–3
To Next Page
Loading...
