Error Messages
B-2 M370430-01 Rev B
Error Messages
Errors are placed in a queue as they are detected. The queue works
on a first in, first out (FIFO) basis. If the queue overflows, the last
error in the queue is replaced with error -350, “Queue Overflow”.
When all errors have been read from the queue, further error
queries return 0, “No error”.
The error queue is cleared when any of the following occur (IEEE
488.2, section 11.4.3.4):
Upon receipt of a *CLS command
Upon reading the last item from the queue
To Next Page
Loading...
