Ametek Sorensen XG - Connecting with PC on same Side of Router as Power Supply

Communications Options
M370430-01 Rev B 6-55
6
Connecting with PC on Same Side of Router as Power Supply
PC
IP Address: 192.168.1.100
Gateway Address: 192.168.1.1
Subnet Mask: 255.255.255.0
Router
IP Address: 192.168.1.1
Network
Power Supply
IP Address: 192.168.1.101
Gateway Address: 192.168.1.1
Subnet Mask: 255.255.255.0
WAN Address: 10.11.27.86
Figure 6-35 PC on Same Side of Router as Power Supply
The simplest case is when they are both on the same side as in
Figure 6-35. In the example of Figure 6-, the router has assigned
addresses to the power supply and to the PC using DHCP. For this
case, the router has assigned an address of 192.168.1.100 to the PC
and an address of 192.168.1.101. To connect to the power supply
by a Web browser simply enter the power supply’s address of
“192.168.1.101” into the Web browser’s address bar. This will
open up the power supply’s Home page. It should appear similar
to Figure 6-36.
Please note that the Web page requires Java to be installed on
the Web browser for it to display properly. Java can be
installed from the Java website.