Ammann ARR 1575 - Handling

100 ARR1575
557021
6 Cab and platform
6.1.3.4 Handling
The infrared remote control is located under the dashboard
cover.
It contains the following transmission elements:
- solar cells,
- infrared diodes for data transmission and measurement
of safe distance.
Clean the transmission elements before starting.
Keep the solar cells clean during operation.
Risk of injury due to obstructed bottom part of the cover!
Before and during the operation with the infrared re-
mote control, make sure the entire bottom part of the
cover remains completely exposed throughout the
whole operation.
The operator must not cover the bottom part of the cov-
er, not even partially.
Proper carrying and use of the infrared remote control
Ensure correct positioning.
• Proper function requires direct visual contact between the
manual infrared remote control and the infrared sensor on
the machine.
The infrared sensor must always be in the area of eect
of the infrared remote control.
The operating angle of the infrared remote control is 40°.