Ammann ARR 1575 - Hydraulic Tank; Checking the Hydraulic Oil Level; Hydraulic Oil Replenishment

83ARR1575
555075A
1
WORKSHOP MANUAL
5.6 Hydraulic tank
5.6.1 Checking the hydraulic oil level
Check the hydraulic oil level always when the engine is cold but
running.
Put the machine on aat terrain.
Let the engine run at idle.
Check the oil level in the inspection hole.
The ideal hydraulic oil level is when the gauge is half-full.
5.6.2 Hydraulic oil replenishment
Take o the ventilation lter (1) from the ller neck.
Rell the required quantity of hydraulic oil.
Screw in the ventilation lter (1) back in place.
Always lubricate the O-ring before screwing it in place.
Check the oil when it is cooled down. Fill up the same oil
type, see Chapter 4.4.