Ammann ARR 1575 - Replacement of the Rubber-Metal Elements of the Rear Bonnet Stop; Adjustment of the Rubber-Metal Elements of the Rear Bonnet Stop

57ARR1575
557D215
557D216
557D217
WORKSHOP MANUAL
Connect the connector of the ignition box.
Connect the N2 connector.
Fasten the connector with acable tie.
Fasten the cables using the fastening straps.
Place the sensor cables and fasten with acable tie.
5.4.7.3 Replacement of the rubber-metal
elements of the rear bonnet stop
Replacement of the rubber-metal elements of the front bonnet
stop (Chapter 5.4.6.3).
5.4.7.4 Adjustment of the rubber-metal
elements of the rear bonnet stop
Adjustment of the rubber-metal elements of the front bonnet
stop (Chapter 5.4.6.4).