Ammann ARR 1575 - Hydraulic Oil Draining

84 ARR1575
555085
1
557017A
2
5 Frame
5.6.3 Hydraulic oil draining
Drain hydraulic oil only at operating temperature.
Residues in the tank are drained with the oil.
Put avessel (with avolume of at least 30 litres) under the hy-
draulic oil drain plug.
Take out the ventilation lter (1).
Remove the plug (2) from the hydraulic tank.
Let the oil ow out into the vessel.
Put on the screw plug (2). Tighten the screw connection with
your hand.
Tighten the screw connections in the hydraulic tank with hand.
When draining the hydraulic oil, replace the hydraulic oil
lter and the ventilation lter as well. See Chapter 5.6.4.