Ammann ARR 1575 - Machine Dimensions and Technical Data

20 ARR1575
3 Machine description
3.1 Machine description
The ARR 1575 trench roller is aroller specially designed for com-
pacting trenches. The drums enable compacting even in very
narrow trenches right up to the trench wall.
Specication of the expected use of the machine
This modern trench roller can be used on wet, clay soils in the
construction of sewers, utility lines, roads, building rells, etc.
On hazardous jobsites, the operator can control the machine
from asafe distance without being exposed to danger.
Only use the ARR 1575 roller for driving on and compacting of
non-cohesive (loose) materials.
The machines are designed for operation under the condi-
tions of the following EN 60721-2-1:2014 types: WT, WDr, MWDr
(warm temperate, warm dry, mild warm dry awith limited tem-
perature range from -15°C (5°F) to +45 °C (113°F).
Please ll in the following data:
(see nameplate and Yanmar engine nameplate)
Machine type
................................................................................................................
Serial number of the machine
................................................................................................................
Year of manufacture
................................................................................................................
Engine type
................................................................................................................
Serial number of the engine
................................................................................................................
The data mentioned in the table refer always when you contact
the dealer or manufacturer.