Ammann ARR 1575 - Hydraulic Parts; Cleaning of the Hydraulic Oil Cooler

248 ARR1575
555023
14 Cooling
14.2 Hydraulic parts
14.2.1 Cleaning of the hydraulic oil cooler
Check that the cooler ns are not dirty or clogged.
Clean the ns with water or blow-clean them with compressed
air.
Never clean the cooler with high pressure (e.g. with
strong water jets).
When the cooler is contaminated by petroleum prod-
ucts, use a cleaning agent and proceed according to
the manufacturer’s instructions! Find out the cause of
contamination!
Do not smoke while working!
Check the hydraulic circuit for leakage.
Follow environmental standards and regulations when
cleaning the machine!
Clean the machine in aworkplace equipped with acatch-
ing system of cleaning agents to avoid contamination of
the soil and water resources!
Do not use forbidden cleaning agents!