Ammann ARR 1575 - Page 12

10 ARR1575
1 Introduction
The workshop manual is divided into separate chapters and contains technical and maintenance data, instructions for adjustment and
instructions for the use of special tools, jigs and aids.
The main purpose of this manual is to provide basic information for disassembly, assembly and service repairs of the main subassem-
blies of the machine.
Labelling of machine subassemblies in this manual corresponds to the spare parts catalogue.
In order to ensure smooth operation of the AMMANN compaction equipment, use only original spare parts supplied by
AMMANN for repairs.
Before disassembly, it is recommended to always mark the removed parts for their reassembly and blank o all holes of individual parts
of the hydraulic system in order to prevent contamination of the hydraulic circuits.
When mounting individual parts on the machine, tighten individual screws or nuts according to the table of tightening torques (see
the appendix), unless specied otherwise in the text.
During work, always follow the safety instructions and measures given in Chapter 2.
The manufacturer constantly improves its products on the basis of operational experience and the latest ndings. Due to develop-
ment, the manufacturer reserves the right to change the images, descriptions, procedures and designs presented in this manual.