95ARR1575
-
+
!
hours
1 2
3
4
5
6
7
WORKSHOP MANUAL
Engine oil pressure indicator lamp (4)
The indication lamp goes on after the key in the ignition box
is switched into the position "I" and goes out after the engine
starts.
If the engine oil pressure indicator lamp turn on during
operation or does not turn o after starting, immediate-
ly stop the machine and the engine.
• Check the engine for oil leaks and correct oil level.
• If the oil level in the engine is correct, contact an authorized
service centre of Ammann.
Note:
The machine is equipped with an automatic shutdown system.
If the oil pressure drops below the limit value, the oil pressure
indicator lamp turns on. It lights up for 4 seconds and then the
machine turns o.
Coolant temperature indicator lamp (5)
There is arisk of engine overheating. Immediately stop
the operation!
If the coolant temperature indicator lamp turns on dur-
ing machine operation, immediately turn o the engine
and rell the coolant.
• Check the cooling system for leaks and the level of coolant
in the cooler / expansion vessel.
• No error found: Contact an authorized service centre of Am-
mann.
Note:
The machine is equipped with an automatic shutdown system.
If the coolant temperature exceeds the limit value, the tempera-
ture indicator lamp turns on. It lights up for 4 seconds and then
the machine turns o.