Press value to be changed (Cycle Type,
Sterilize Temperature, Sterilize Time or Dry
Time). Once a value has been accepted at
any individual change values screen (see
below), pressing OK returns control to this
screen.
Enter Sterilize Temp (Temperature) – Enter value
using the keypad.
Acceptable value range: 121°C (250°F), or
134° (270°).
Enter Sterilize Time – Enter the value using the
keypad.
Acceptable value range: 03:30 - 99:99 m:s
(m:s = minutes and seconds).
Enter Dry Time – Enter the value using the
keypad.
Acceptable value range: 03:30 - 99:99 m:s
(m:s = minutes and seconds).
Press (backspace) to clear values that have been entered.
Press (OK) to accept values that have been entered, and return to change cycle
values screen.
Press (exit) to abandon any values entered and return to change cycle values
screen.
Keypad
Backspace
OK (accept
changes)
Exit
(abandon
changes)
Continued from Previous Page
To Next Page
Loading...
