7-30
P129390-106 Operator Manual Cycle and Control Value Programming
7.5.8 Units This feature is used to select or change the units the sterilizer uses
when displaying and printing chamber temperature and pressure.
This function allows selection of either Fahrenheit or Celsius units for
displaying and printing temperature. Pressure units can be changed
between psig/inHg or bars.
NOTE: Although Amsco Evolution Medium Steam Sterilizers are
factory-set to operate using Celsius temperature units, the sterilizer
can be reprogrammed to display and print using Fahrenheit
temperature units.
1. To access this feature, press the Options button at the main
screen; at Options screen press Machine Setup. The display
advances to Units screen.
2. At screen machine setup screen, press Units button; the display
advances to units screen.
To Next Page
Loading...
