7-9
Cycle and Control Value Programming Operator Manual P129390-106
a. If an incorrect number is entered, press the backspace key
to clear the entry, then use the keypad to enter the correct
value.
b. Once the correct time has been entered, press OK to accept
change hours screen.
c. Press EXIT to return to Change Time and Date screen.
4. Change Minutes – use the touch screen key pad to enter the
minutes value, this can be between 00 and 59.
a. If an incorrect value is entered, press the backspace key to
clear the entry, then use the keypad to enter the correct
value.
To Next Page
Loading...
