To adjust the balance of an audio pair:
Front Panel
1. Enter the AUDIO menu on the Front Panel interface.
2. Select Output Settings to set up the audio output.
3. Scroll down and select a Settings Mode to set up the audio:
• Select BASIC to link channel pairs and use the first channel pair settings for all pairs.
• Select ADVANCED to unlink channel pairs and set up channel pairs individually.
4. Select a channel pair if required to set up the channel pair.
NOTE:
• In BASIC settings mode, only the first channel pair settings are available and there is no need to select a channel pair.
• In ADVANCED settings mode, you can select a channel pair to access the channel pair settings.
TIP: Press the AUDIO button and select a channel pair to access the channel pair settings directly.
5. Select Balance to adjust the balance of the audio pair.
Remember: If channel pairs are linked, the first channel pair setting will be used for all pairs.
TIP: Toggle the Listen on the Headphone box if required to prelisten to the audio pair on the headphone output.
To Next Page
Loading...
Need help?
General
