Front Panel
1. Enter the CONTROL menu on the Front Panel interface.
2. Scroll down and select Factory Reset (out of the box) to start the factory reset:
• Select YES to confirm the reset (/!\ this action is irreversible).
• Select NO to cancel the action.
NOTE: The unit will reboot itself once the reset is complete.
Web RCS
1. Go to the Setup menu on the Web RCS interface.
2. Click on the CONTROL tab to access the device settings and control functions.
3. In the left side toolbar, select Factory Reset to access the resets page.
4. Under Factory Reset (Out of the Box), click on the Start button:
• Select again to confirm the reset (/!\ this action is irreversible).
• Select elsewhere to cancel the action.
NOTE: The unit will reboot itself once the reset is complete.
To Next Page
Loading...
Need help?
General
